

This is what you need:

Summery of necessary materials
Put the template form the frame on your fabric and cut it out.

Put cardboard from frame onto fabric

Secure cardboard with pins

Cut fabric alongside the cardboard

Pieces of fabric that fit into the frame
Design letters in the Silhouette Studio software, mirror them and choose the cutter settings for HappyFlex (in this case).




Make sure the hot melt side is facing up and the clear carrier is facing down. Cut letters and weed using the
HappyWeeder.

Place the fabric inside the HappyPress and pre iron.

Place the letters on the fabric and press/iron.
Afterwards peel off the clear carrier.

Cut HappyFashion Foil red

Already cut HappyFashion Foil red
Put the HappyFashion Foil on the letters, coloured side facing up.

A smooth HappyFashion Foil for a polished finish.

Crumble up the HappyFashion foil, then smoothen it out to create the shabby look we're aiming for after pressing/ironing.
The finished letters should look somewhat like this:


Simply put the letters into the frame

Done!

The appearance depends on the light incidence. Picture shows HappyFashion red.

The appearance depends on the light incidence. Picture shows HappyFashion red.

The appearance depends on the light incidence. Picture shows HappyFashion red.

The appearance depends on the light incidence. Picture shows HappyFashion rainbow (HOME).

The appearance depends on the light incidence. Picture shows HappyFashion rainbow (HOME).